Rotary Cutters
Standard Duty Cutter-
Cutting capacity of 1.5”
11 GA deck thickness
Gearbox rated up to 45HP
5-year limited warranty on gearbox
Rubber Guards and Chains are optional
These rotary cutters are designed for standard-duty applications such as weeds, grass, and light brush up to 1.5” in diameter. These cutters are designed to work with 15 to 50 hp tractors, and are available in 48”, 60”, and 72” widths. These cutters use a single spindle with two free-swinging blades to absorb shock if blades are impacted. A shear bolt is put through the input shaft or a slip clutch to protect the gearbox and driveline from damage.
Medium Duty Cutter-
Cutting capacity of 2”
10 GA deck thickness
Gearbox rated up to 90HP
5-year limited warranty on gearbox
Rubber Guards and Chains are optional
Has ½” Blade carrier
These smooth-top cutters are designed for medium/heavy-duty applications such as weeds, grass, and brush up to 2” diameter. These cutters are designed to work with 32 to 90 horsepower tractors, and are available in 60” and 72” widths.
Heavy Duty Cutters-
Cutting capacity of 3”
10 GA deck thickness
Gearbox rated up to 125HP
5-year limited warranty on gearbox
Rubber Guards and Chains are optional
Has ½” Blade carrier
Center drive shaft is shock coupler protected
These Heavy-Duty Dual Spindle Cutters are designed for heavy-duty applications such as weeds, grass, and brush up to 3” diameter. These cutters are designed to work with 42 or 52 minimum hp tractors, and are available in 94” and 117” widths. The cutter uses dual spindles with two free-swinging blades each, which reduce the shock of impact when a stationary object is contacted. A slip clutch and dual shock couplers protect the gearboxes and drivelines from damage. Standard equipment includes driveline shields and clutch shields. Front and rear chain discharge shields are available. Available in lift-type and pull-type models.
2515 Batwing cutters-
Cutting Capacity up to 2’’
10 GA Deck thickness
Gearbox rated up to 175hp
5-year limited warranty on gearbox
If you are looking for a Batwing/Flex-Wing Cutter for your tractor, this batwing is the choice for you. With its smooth top deck and spring suspension, this flex-wing is designed to cut grass, weeds, and light brush up to 2” in material while only requiring a minimum PTO horsepower of 50 and one hydraulic outlet. This Cutter uses 3 spindles with 2 free swinging blades, and has a 180” cutting width.
3515 Batwing cutters-
Cutting Capacity up to 3.5”
10 GA Deck thickness
Gearbox rated up to 235hp
5-year limited warranty on gearbox
Chains come standard
This cutter offers a reinforced deck structure from front to rear and side to side of the center deck weldment. ¼” inch wall tubing along the length of the hinges for extra hinge protection. Wing fold hydraulic cylinder mount spans the entire width of the center deck weldment and ties into the cutter deck lift cylinder to achieve maximum structural integrity. Deck rings standard on each deck to ensure bent blades do not damage the structure of the cutter. Heavy 7 Gauge press formed blade pans are used to reduce the ripple effect commonly seen on competitive models. This allows for greater rotational balance, better cut quality and greater gearbox longevity.
